FELTBACK SHEET VNYL ADH 4/1G

ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive. This adhesive was developed with the optimum open time and working time for the positioning of felt-backed sheet vinyl flooring. This adhesive is for residential and moderate commercial traffic and has a lifetime non-staining warranty.|For adhering mineral fibrous felt-backed sheet vinyl|Bonds with concrete, APA rated plywood, vinyl composition tile (free of wax), non-cushioned felt-backed sheet vinyl (free of wax and embossing leveler), primed gypcrete (ASTM F2419) and terrazzo|For interior installation only|Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH|Up to 25 minutes open time and 24 to 48 hour curing time|Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel|Approximately 220 to 240 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/32 in. x 1/32 in. U-notch trowel|Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168|Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives|CRI Green Label Plus Certified - GLP no. 36471|Non-flammable for safe use|10 year direct bond, lifetime non-staining limited warranty|High temperature and low humidity will cause the adhesive to cure faster while premature traffic can cause installation failure|Do not use this adhesive for pure/luxury vinyl or vinyl-backed products