VINYL COMPOS TILE ADH 4/1G

ROBERTS 2057 Vinyl Composition Tile (VCT) Adhesive is a clear, solvent-free, water-based, thin-spread tile adhesive that provides excellent grab and high residual tack. This superior grade tile adhesive brushes, rolls or trowels on and helps hold tiles firmly in place, even when subjected to repeated cleaning and mopping. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes.|For adhering vinyl composition tile (excluding self-stick), including tile-over-tile installation|Bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo|Ideal for direct bond and double bond installation|Moisture Control Adhesive - up to 8 lbs. MVER and 85% RH|Thin-spread adhesive dries clear in up to 24 hours with the restriction of foot traffic and moving heavy objects|Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel|Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168|Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives|CRI Green Label Plus Certified - GLP no. 3647|15 year moisture control, 15 year direct bond, 7 year double bond limited warranty|Do not expose freshly applied adhesive to water for 4 days or to standing water for 4 weeks